Metal Random Packing and Structured Packing

Blog

Home

Blog

  • PTFE Corrugated Plate Packing Introduction and Application Overview

    Jul 11, 2024
    The absorption and desorption processes benefit greatly from the use of PTFE corrugated plate packing. Additionally used for the filtration of exhaust gases and the activities of heat exchange. When used to operations that include large liquid loads and high operating pressures, it will be effective. Polypropylene (PP), polyvinyl chloride (PVC), and polyvinylidene fluoride (PVDF) are some of the materials with which it is constructed. Polypropylene is able to tolerate temperatures of up to 110 degrees Celsius, while polyvinylidene fluoride can survive temperatures of up to 150 degrees Celsius. Both of these materials are appropriate for use as foam forming materials. The benefits of PTFE corrugated plate packing with tiny holes on the packing sheet include high energy, low pressure drop, and high specific surface area. These advantages may lead to an increase in output, a reduction in energy consumption, and an improvement in efficiency. At the same time, the solid particles that are contained inside the material may be released via the corrugated bottom of the fillers. This results in outstanding anti-blocking performance and higher operating flexibility than typical tower fillers. This is because the fillers are arranged in an ordered fashion. Bulk tower fillers may be replaced to provide a five percent increase in production capacity and a fifty percent improvement in production efficiency. At the same time, it has the qualities of being light in weight and inexpensive, making it perfect for tower containers with a high capacity. PTFE Corrugated Plate Packing Performance and Efficiency Advantages    Products made of PTFE corrugated plate packaging are mostly used in a variety of sectors, including gas purification, environmental protection, separation and purification, and others like these. It has the benefits of being simple to replace, having a high specific surface area, having a minimal pressure drop, being somewhat light in weight, and having a big capacity. Packing using PTFE corrugated plates has the following advantages: Resistance to high temperatures, with a working temperature of up to 250 degrees Celsius. The material is resistant to low temperatures and has a high mechanical toughness; even if the temperature drops to -196 degrees Celsius, it is still possible to retain a 5% elongation. When it comes to the majority of chemicals and solvents, corrosion resistance is a characteristic that demonstrates inertness and resistance to strong acids, alkalis, water, and a variety of organic solvents. In plastics, climate resistance has a lifetime that is characterised by ageing. The term “high lubrication” refers to the characteristic of solid materials having a low coefficient of friction. Non-adhesion is a term that describes the low surface tension of solid materials that do not attach to any substance under any circumstances. The material is non-toxic and physiologically inert, which means that it may be implanted in the body as an artificial blood channel and organ for an extended period of time without causing any unfavourable effects. Insulation for electrical systems is able to tolerate high voltages of up to 1500 volts. The Technical Parameter(s) The typem2/m3 on the surface areaI/m Plate void rate as a percentagempa/m value for pressure decrease Item number: SB-125Y 125 98.5 1.0-2.0 200 140 125X 0.8-0.9 140 400 The SB-250Y 250 97 2,000-2,500 300 250 times 1.5-2.0 time 180 300 SB-350Y 350 95 3.5-4.0 200 120 The 350X 2.3-2.8 angle 130 The SB-500Y 500 93 4.0-4.5 300 500 times 2.8-3.2 180 180 The article highlights the benefits of PTFE corrugated plate packing in absorption and desorption processes, highlighting its efficiency and effectiveness. Key advantages include enhanced mass transfer, improved energy utilization, and reduced pressure drop. Technical aspects include surface area, void rates, and plate dimensions. Real-world applications demonstrate the tangible benefits and practical implications of PTFE corrugated plate packing. The article concludes that PTFE corrugated plate packing is a game-changer in these processes, enhancing efficiency and sustainability in critical industrial operations.
    Read More
  • Optimizing Separation: A Comprehensive Exploration Of Polyhedral Hollow Balls

    Jul 03, 2024
    Optimizing Separation: A Comprehensive Exploration of Polyhedral Hollow Balls Polyhedral hollow balls, which are often referred to as polyhedral ball packing, are a sort of structured packing that is used in a variety of separation processes, such as distillation, absorption, and stripping. Specifically, they are intended to improve separation performance while also facilitating effective mass transfer.Plastic polymers such as polypropylene (PP), polyethylene (PE), or polyvinyl chloride (PVC) are frequently used in the production of polyhedral hollow balls. They have a one-of-a-kind geometric form that is reminiscent of a polyhedron, with numerous faces that are either flat or curved and interiors that are hollow. In order to generate a packed bed that has a wide surface area for gas-liquid interaction, these balls are piled inside a column or vessel.    Polyhedral Hollow Balls Data sheet: Size   mm Surface Area   ㎡/m³ Void fraction   % Bunk number   Pieces/m3 Φ25 460 90 64000 Φ38 325 91 25000 Φ50 237 91 11500 Φ76 214 92 3000 Φ100 193 80 2800 Listed below are some of the most important characteristics and benefits of polyhedral hollow balls: 1. Surface Area: Because of its geometric structure and hollow innards, polyhedral hollow balls provide a huge surface area per unit volume (also known as the surface area per unit volume). Through the promotion of effective mass transfer between the gas and liquid phases, this increased surface area contributes to an improvement in separation efficiency.2. Low-Pressure Drop: Polyhedral hollow balls often have a low-pressure drop, which indicates that they provide a little amount of resistance to the flow of fluid. This quality contributes to a reduction in both the amount of energy used and the expenses of operation.3. High Capacity: The one-of-a-kind construction of polyhedral hollow balls makes it possible for them to have a high capacity for the handling of liquids and gases. High flow rates may be accommodated by them, and they are suited for applications that have throughput requirements that are very demanding.4. Uniform Gas and Liquid Distribution: The polyhedral hollow balls’ geometric design encourages uniform gas and liquid distribution throughout the packed bed. This is also referred to as the “fourth principle.” This guarantees that the two phases are effectively in touch with one another, which improves the separation performance.5. Chemical Resistance: Polyhedral hollow balls made of plastic materials such as polypropylene (PP), polyethylene (PE), or polyvinyl chloride (PVC) provide high chemical resistance. They are able to tolerate a large variety of corrosive chemicals that you may come across throughout the separation process.6. Ease of Installation: Polyhedral hollow balls are simple to install and need little maintenance, which brings us to our sixth point: ease of installation. They are able to be retrofitted into vessels or columns that already exist without requiring considerable alterations.When high separation efficiency, low pressure drop, and chemical resistance are critical requirements in an application, polyhedral hollow balls are often utilised as a solution. The chemical processing industry, the petrochemical industry, the oil and gas refining industry, and environmental engineering are all examples of industries that make use of them.It is important to note that the precise selection of packing material, which may include polyhedral hollow balls, should be based on the specific separation needs, the circumstances of the process, and the compatibility with the fluids used in the process. In a variety of separation procedures, polyhedral hollow balls are essential components. The following is a list of specialised applications for polyhedral hollow balls:     1. Distillation:During the distillation process, polyhedral hollow balls are often used in distillation columns. This allows for the separation of liquid mixtures according to the boiling points of the individual components. They have a high surface area that allows for effective interaction between the liquid and vapour phases, which in turn promotes the separation of components that have varying levels of volatility. The polyhedral shape of the balls guarantees that the gas and liquid are distributed uniformly, which greatly improves the efficiency of the separation process.2. Absorption: Polyhedral hollow balls are used in absorption columns for the purpose of removing gaseous contaminants or recovering valuable components from gas streams. This process is known as absorption. They make it possible for the gas phase and the liquid phase to come into close contact with one another, which in turn makes it possible for solutes to move from the gas phase into the liquid phase. The polyhedral form, which provides a high surface area, contributes to an increase in the efficiency of the absorption process.3. Stripping: Polyhedral hollow balls are used in the process of stripping, which is the act of removing volatile components from anything that is liquid. Within the context of this application, the balls provide a substantial surface area that supports the process of evaporating the volatile components from the liquid phase. The polyhedral form facilitates the efficient movement of heat and mass, which in turn enables stripping operations to be carried out effectively.4. Treatment of Wastewater Polyhedral hollow balls are used in wastewater treatment systems, such as air stripping towers and biological treatment units, both of which are examples of such systems. In biological treatment operations, they either offer a medium for the attachment of microorganisms or help remove volatile pollutants from the liquid phase. Both of these purposes are accomplished with their assistance. A excellent gas-liquid contact is ensured by the polyhedral shape, which also contributes to an improvement in the performance of the treatment system.Polyhedral hollow balls provide a number of benefits, including a large surface area, a low pressure drop, uniform distribution, and resistance to chemical substances. Because of these characteristics, they are suited for a broad variety of separation applications in a variety of sectors, including environmental engineering, petrochemicals, refineries, and chemical processing.When choosing polyhedral hollow balls or any other kind of packing material for a given application, it is essential to take into account the unique separation requirements, operating circumstances, and compatibility with process fluids. It is possible to manufacture polyhedral hollow balls from a wide variety of materials, depending on the particular purpose and the circumstances in which they are used. The following are examples of materials that are often used for polyhedral hollow balls: 1. Polypropylene (PP): Polypropylene is a material that is often used for polyhedral hollow balls because of its high level of chemical resistance, cheap cost, and widespread availability. Because polypropylene (PP) is resistant to a wide variety of acids, alkalis, and organic solvents, it may be used in a wide variety of applications within the chemical industry. 2.Polyethylene (PE):In addition to polyethylene (PE), polyethylene is another material that is often used for polyhedral hollow balls. The chemical resistance, durability, and low friction features of this material are all quite admirable. Polyethylene (PE) is a material that is often used in applications that need resistance to wear, impact, and abrasion. 3. Polyvinyl Chloride (PVC): PVC is a versatile material that is utilised for a variety of reasons in the industrial sector, including the production of polyhedral hollow balls. When it comes to chemical resistance, mechanical strength, and durability, PVC is an excellent material. It is used often in a variety of sectors, including chemical processing, water treatment, and others. 4. Polyvinylidene Fluoride (PVDF): PVDF is a high-performance polymer that is well-known for its exceptional resistance to chemical substances, resilience to high temperatures, and resistance to ultraviolet (UV) radiation. Polyhedral hollow balls made of polyvinylidene fluoride (PVDF) are appropriate for use in applications that include high-temperature conditions or hostile chemicals. 5. Other Materials: The production of polyhedral hollow balls may also include the utilisation of other materials, such as polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), and specialised technical plastics. This is contingent upon the particular criteria that are being met. The selection of the material is determined by a number of criteria, including the chemical compatibility of the material with the process fluids, the conditions of temperature and pressure, the mechanical qualities, and certain considerations on cost. Therefore, it is essential to choose a material that is capable of withstanding the particular working circumstances and providing the appropriate performance characteristics for the application that is being considered.
    Read More
  • Super Duplex Stainless Steel Pall Ring Packing

    Jun 27, 2024
    Super duplex stainless steel pall ring packing made of super duplex stainless steel packaging A specific sort of packing material that is used in liquid-liquid extraction or liquid-liquid contacting procedures is known as jet Super duplex stainless steel pall ring packing. This type of packing material is also referred to as liquid-liquid jet flow packing. The purpose of this device is to improve the mixing and dispersion of two liquids that cannot mix together, as well as to make mass transfer between the liquids easier. A packed bed is organized in a packed bed inside a column or vessel to provide jet flow ring packing. This Super duplex stainless steel pall ring packing is made up of a sequence of annular or ring-shaped pieces. Each element normally has a central aperture or nozzle that allows for the introduction of a single liquid, which represents the dispersed phase, into the column in the form of a fluid jet or stream. When the second liquid, which is the continuous phase, travels around the jet flow rings, it generates a significant amount of turbulence and brings the two phases into close engagement with one another. Sheets of data: size   mm surface area m2/m3   void fraction   %     number/cubic meter 16×16×0.3 362 94.9 220000 25×25×0.4 219 95 52380 38×38×0.6 146 95.9 15200 50×50×0.8 109 96 6500 76×76×1 71 96.1 1980 One of the most important characteristics and benefits of Super duplex stainless steel pall ring packing is that it: 1. Improved Mixing: The configuration of jet flow rings encourages a high level of mixing between the continuous and scattered phases resulting in enhanced mixing. Because of the jetting action of the dispersed phase, turbulent flow patterns are produced. Additionally, the interfacial contact between the two liquids is enhanced, which speeds up the process of mass transfer. 2. Increased Interfacial Area: The turbulent mixing that is produced by the jet flow rings leads to a significant increase in the interfacial area that exists between the two liquid phases. The larger interfacial area makes it possible to transfer mass in an effective manner, which may be used for activities such as the transfer of solutes or the extraction of components that are wanted from one liquid phase to another. 3. Improved Phase Separation: After the appropriate mass transfer has taken place, the intensive mixing and contact that is made possible by Jet flow ring packing contribute to the separation of the two liquid phases. It is possible to boost the extraction efficiency or separation performance with the assistance of the increased phase separation. 4. Scalability and Flexibility: Jet flow ring packing may be used in columns or containers of varying sizes, and it can be adapted to meet the needs of a particular process. It is possible to alter the number of jet flow rings, as well as their size and design, in order to achieve optimal performance in the process. Jet flow ring packing has a wide range of applications, including solvent extraction, reactive extraction, and liquid-liquid contacting for chemical reactions. These are only some of the liquid-liquid extraction techniques that may benefit from its use. The petrochemical industry, the pharmaceutical industry, the food processing industry, and environmental engineering are all businesses that make use of it. It is essential to keep in mind that the particular design and performance of Jet flow ring packing might differ from one manufacturer to another, as well as change based on the application that is being considered. When choosing the proper packing material and design, it is important to take into consideration the unique needs of the process. These criteria include the intended mass transfer efficiency, phase separation characteristics, and compatibility with the liquids used in the process. It is possible for the material that is utilized for Jet flow ring packing to change based on the particular application and the needs of the process. The following are examples of materials that are often used for Super duplex stainless steel pall ring packing: 1. Metal: Due to its resistance to corrosion and its high mechanical strength, stainless steel, such as 304 or 316 stainless steel, is often used for jet flow ring packing. Jet flow rings made of metal are suited for use in applications that include liquids that are either hostile or high in temperature. 2. Plastics: Jet flow ring packing is manufactured using a wide variety of plastic materials because of their resistance to chemicals, their lightweight nature, and their cost-effectiveness. Polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC), and polytetrafluoroethylene (PTFE) are some examples of polymers that are used. These materials are often used in applications that are less corrosive or that operate at lower temperatures. In applications that need high-temperature resistance and chemical stability, ceramic materials, such as alumina or porcelain, may be used for jet flow ring packing. This is the case in situations where Jet flow ring packing is required. As a result of its exceptional heat resistance and resistance to severe chemicals, ceramic jet flow rings have gained widespread recognition. A number of considerations, including the chemical compatibility of the material with the process fluids, the temperature and pressure conditions, and the particular separation or contacting requirements, all play a role in the selection of the packing material. When designing the Jet flow ring packing, it is vital to take into consideration the material’s resistance to corrosion, mechanical qualities, and long-term durability. This will guarantee that the packing will operate best and last as long as possible. When it comes to liquid-liquid extraction procedures or liquid-liquid contacting activities, jet flow ring packing is the most common use. The following is a list of particular applications within which Super duplex stainless steel pall ring packing is often utilized: 1. Solute Extraction: Super duplex stainless steel pall ring packing is a technique that is often used in solvent extraction procedures. This technique is used to promote the transfer of solutes between two liquid phases that are incompatible with one another. It does this by improving the mixing and interaction between the feed solution and the solvent, which in turn makes it possible to extract the components that are sought more effectively. 2. Reactive Extraction: Reactive extraction is a process that includes the simultaneous extraction of two liquid phases and reactivity of chemical substances between them. Jet flow ring packing encourages intensive mixing and contact, which improves the kinetics of the reaction and makes it easier to recover the products of the process. 3. Extraction of Liquids from Liquids: Jet flow ring packing is employed in typical liquid-liquid extraction operations. In these processes, it assists in the separation and transfer of components from one liquid phase to another. For the purpose of extracting valuable molecules or removing contaminants, it is often used in a variety of sectors, including the pharmaceutical industry, the petrochemical industry, and the food processing industry. In some chemical processes, it is required to create intimate contact between two immiscible liquid phases in order to accomplish mass transfer or reaction goals. This is referred to as “liquid-liquid contact.” Jet flow ring packing makes it easier for liquids to come into contact with one another by generating a significant amount of turbulence and increasing the amount of interfacial area created between the two phases.                                     Chemical Reactors: Jet flow ring packing may be used in chemical reactors for liquid-liquid reactions that need improved mixing and contact. This is the case when both of these conditions are met. It does this by facilitating effective mass transfer and reaction kinetics, which ultimately results in enhanced conversion and selectivity. It is dependent on the needs of the process, such as the intended mass transfer efficiency, phase separation characteristics, chemical compatibility, and operating circumstances, that the precise selection of Jet flow ring packing is made. In order to maximize the performance of the process and obtain the required separation or reaction output, the design of the jet flow rings, including their size, shape, and configuration, may be customized. Super duplex stainless steel pall ring packing made of super duplex stainless steel packaging The qualities of low pressure drop, big flux, and high efficiency are actually possessed by super duplex stainless steel pall ring packing, which is constructed of either material classified as 2507 or material classified as 2205. Additionally, metal pall ring is also included in this category. When compared to PALL rings of comparable diameters, HYPAK packing demonstrates a comparatively smaller pressure drop and a much greater mass transfer efficiency. This indicates that when HYPAK packing is used, the fluid encounters less resistance as it flows through the packing, which ultimately results in a reduction in the amount of pressure loss that occurs inside the system. Additionally, the packing layer’s ability to distribute liquids effectively inside the layer adds to an increased mass transfer efficiency, which in turn makes the packing layer more successful in chemical and adsorption processes.size in millimeters surface area in square meters per cubic meter vacancy fraction in percent number per cubic meter Additionally, the existence of window holes on the wall of the Super duplex stainless steel pall ring packing makes it easier to distribute gas and liquid in a consistent manner throughout the packing layer, which ultimately results in an improvement in the performance of mass transfer. Through the use of this structural design, the surface area and contact area of the packing are increased, which in turn facilitates the effective transfer of mass between the gas and liquid phases. Consequently, the advantages of low pressure drop, big flux, and high efficiency are offered by both the metal pall ring and the super duplex stainless steel pall ring packing, which may be made of either 2507 or 2205 material. Given these qualities, they are suited for a wide range of applications in the chemical and adsorption fields. A 50/50 dual phase structure is commonly produced by the 2507 and 2205 metal pall rings after they have been subjected to the necessary solid solution treatment. This results in the rings exhibiting a perfect aV ratio. With a rise in temperature, the ferrite phase of the steel becomes more prevalent at temperatures higher than 1050 degrees Celsius. The substantial nitrogen component of these steels, on the other hand, prohibits considerable changes in the phase ratio before temperatures below 1300 degrees Celsius. These steels have the potential to develop V2 phase, intermetallic phases (such as 6 phase, X phase, R phase, and C phase), and oxide precipitates like Cr2N on their ferrite matrix if they are not subjected to age treatment at varying temperatures or heat treatment. Generally speaking, carbides are not found in these steels because of the low carbon content that they have, which is normally between 0.01% and 0.02%. In a nutshell, the microstructure of the 2507 and 2205 metal pall rings reveals a 50/50 dual phase structure when they are treated to an appropriate treatment with a solid solution. Over a specific temperature range, the phase ratio maintains a level of stability that is reasonably consistent. The lack of an aging treatment, on the other hand, may result in the formation of V2 phase, intermetallic phases, and oxide precipitates on the ferrite matrix. Carbide precipitates, on the other hand, are normally rare because of the low carbon content. The Super duplex stainless steel pall ring packing made of super duplex stainless steel is a kind of packing material that is often used in apparatus such as chemical towers and adsorption towers. Its primary purpose is to provide a substantial surface area and impressive mass transfer ability. It is constructed out of stainless steel, which is known for its great resistance to corrosion and its strength.The materials 2507 and 2205 are both examples of duplex stainless steels, which are popular alloys of stainless steel that have outstanding resistance to corrosion and mechanical qualities with regard to their properties. Iron, chromium, nickel, and a few other alloying elements like molybdenum and nitrogen make up the majority of their composition. 2507 material is superior than 2205 material in terms of corrosion resistance and corrosion resistance because it includes greater levels of chromium, molybdenum, and nitrogen than 2205 material does.One kind of filler is known as a super duplex stainless steel pall ring. This type of filler is often constructed out of metal elements like stainless steel. The filler has a shape that is comparable to a ring, and it has a number of vertical structures that are wavy or sheet-like. These structures are designed to enhance the filler’s surface area and improve its mass transfer ability.As a result, the super duplex stainless steel ball ring packing may be manufactured based on metal ball rings that are constructed of either 2507 or 2205 materials. Within the realm of demanding chemical and adsorption processes, this particular form of filler is used extensively for the purpose of providing effective mass transfer and resistance to corrosion.I am.
    Read More
  • Talk about wire mesh demister

    Jun 18, 2024
    The wire mesh demister The wire mesh demister is composed of two parts: the steam liquid filter mesh pad (assembled by several mesh blocks) and the support. The mesh block is composed of several layers of Pingpu corrugated vapor-liquid filter screen, grid and distance rod.The wire mesh demister is a gas-liquid separation device. When the gas passes through the wire mesh pad of the demister, it can remove the entrained mist and other moisture substances. HG/T21618-1998 standard is a new standard revised on the basis of the original Ministry of Chemical Industry HG5-1404-81, HG5-1405-81 and HG5-1406-81, combined with the actual use experience of wire mesh demister and the advanced technology in the imported device. The materials selected for the screen demister are divided into two types, one is plastic and the other is metal. The plastics are subdivided into PP polypropylene, PE polyethylene, PVC polyvinyl and PTFE polytetrafluoroethylene. Metal is subdivided into 201, 304, 304L, 321, 316, 316L, 310S, NCU-30, Monel400, N201, and other materials. The wire mesh demister Wire mesh demister, which is mainly used for separating diameters greater than 3 μ m~5 μ When the gas with mist rises at a certain speed and passes through the wire mesh on the grid, the inertia of the rising mist makes the mist collide with the filament and adhere to the surface of the filament. The fog on the surface of the filament is further diffused and the gravity sedimentation of the fog itself makes the fog form large liquid droplets and flow along the filament to its interlacing place. Due to the wettability of the filaments, the surface tension of the liquid and the capillary action of the filaments, the droplets become larger and larger, until their gravity exceeds the combined force of the rising buoyancy of the gas and the surface tension of the liquid, they will be separated and fall, and flow to the downstream equipment of the container. As long as the operating gas speed and other conditions are properly selected, the demister efficiency can reach more than 97% after the gas passes through the wire mesh demister, which can completely remove the fog.
    Read More
  • One-time molding of the ball ring their manufacturing process has those

    Jun 13, 2024
    Metal ball ring filler is widely used in chemical industry and other industries, to be used for medium separation, is an improvement on the basis of the Lacey ring, the ring wall has two rows of windows with extended tongue, each window has five tongue, this kind of arrangement improves the gas-liquid distribution and makes full use of the inner surface of the ring. In the prior art, the manufacture of stainless steel ball rings requires three processes, namely, breaking, bending and rounding, thus requiring at least two sets of dies, affecting production efficiency, and not using human and material resources rationally. The invention of a new manufacturing process for a ball ring aims to make up for the shortcomings of the existing technology and provides a mold capable of forming the ball ring at one time. A ball ring is formed once. The die comprises an upper die and a lower die, the lower die is composed of a base and a worktable, and the base and the worktable are supported and connected by guide pillars, the lower end of the crucible is used for forming the tongue die of the tongue page of the Bauer Ring, and the upper die is arranged side by side with the trimming and bending die. Feed the crucible into a"Darn" shape. The die with the tongue shape of a knife is fixedly connected on the base, and the die with the tongue is divided into two rows of three in each row, and the die is detachably installed on the punch. After adopting the practical new structure, the stainless steel ball ring can be made by using a set of mould, which saves the labor and improves the working efficiency and greatly reduces the manpower and material resources. The specific implementation of the Bauer Ring The following is a step-by-step explanation of the concrete embodiment of the utility model. The one-time forming die for the Bauer Ring in this embodiment comprises an upper die and a lower die. The lower die is composed of a base and a worktable. The base and the worktable are supported and connected by guide pillars. One side of the worktable is provided with four parallel sliding blocks. The other side is provided with a forming die for fixing the ball ring into a shape. The working table is also provided with a feeding port, and the lower end of the feeding port is provided with a tongue mould for punching out the ball ring tongue body. The upper die is arranged side by side with the cutting edge and the bending die. The inlet is a"Mouth" shape. The die for the tongue page is a knife-shaped die which is fixedly connected to the base. The model of the tongue page is two rows, three in each row. The die is detachably connected to the punch. In working condition, the stainless steel plate extends into the Feed Inlet. The two upward-extending tongue pages are punched out of the tongue body model, and the slider is extended outward. Then use the cutter to cut the semi-finished product. At the same time, the bending die is cut into a"U" shape. After that, the slider is ejected inward and the semi-finished product labeled"U" is ejected into the molding die, which is rounded up to create a stainless steel ball ring. It changes the present situation that the traditional process needs three processes to produce"Ball ring", and further improves the production efficiency.
    Read More
  • Talk About The Wire Mesh Demister

    Jun 03, 2024
    The wire mesh demister The wire mesh demister is composed of two parts: the steam liquid filter mesh pad (assembled by several mesh blocks) and the support. The mesh block is composed of several layers of Pingpu corrugated vapor-liquid filter screen, grid and distance rod.The wire mesh demister is a gas-liquid separation device. When the gas passes through the wire mesh pad of the demister, it can remove the entrained mist and other moisture substances. HG/T21618-1998 standard is a new standard revised on the basis of the original Ministry of Chemical Industry HG5-1404-81, HG5-1405-81 and HG5-1406-81, combined with the actual use experience of wire mesh demister and the advanced technology in the imported device. The materials selected for the screen demister are divided into two types, one is plastic and the other is metal. The plastics are subdivided into PP polypropylene, PE polyethylene, PVC polyvinyl and PTFE polytetrafluoroethylene. Metal is subdivided into 201, 304, 304L, 321, 316, 316L, 310S, NCU-30, Monel400, N201, and other materials. The wire mesh demister Wire mesh demister, which is mainly used for separating diameters greater than 3 μ m~5 μ When the gas with mist rises at a certain speed and passes through the wire mesh on the grid, the inertia of the rising mist makes the mist collide with the filament and adhere to the surface of the filament. The fog on the surface of the filament is further diffused and the gravity sedimentation of the fog itself makes the fog form large liquid droplets and flow along the filament to its interlacing place. Due to the wettability of the filaments, the surface tension of the liquid and the capillary action of the filaments, the droplets become larger and larger, until their gravity exceeds the combined force of the rising buoyancy of the gas and the surface tension of the liquid, they will be separated and fall, and flow to the downstream equipment of the container. As long as the operating gas speed and other conditions are properly selected, the demister efficiency can reach more than 97% after the gas passes through the wire mesh demister, which can completely remove the fog.
    Read More
  • What are the performance of Cascade rings?

    Apr 18, 2024
    1. Reducing pressure drop: Metal stepped rings have large gaps and flux in the path of gas-liquid flow, which can reduce pressure drop. 2. Increasing the capacity of the reaction tower: The increase in the capacity of the reaction tower is the direct reason for the decrease in pressure drop. The metal step ring keeps the reaction contact away from the pressure drop contact with overflow phenomenon, which means it can handle more gas-liquid and increase the capacity of the reaction tower. 3. Enhanced anti fouling ability: The pointing position of the metal step ring enables the gap in the direction of gas-liquid flow to reach a value, so any solid masonry can pass through the packing layer with the gas-liquid flow. 4. Improving reaction efficiency: The metal step ring limits its ring surface to be vertical rather than parallel, and this design has more prominent advantages in mass transfer. Because the reaction efficiency depends on the size of the contact surface. The design of parallel surfaces will prevent the inner side of the ring from coming into contact with liquid. A packed tower is a type of tower equipment. Fill the tower with appropriate height of packing to increase the contact surface between the two fluids. For example, when applied to gas absorption, the liquid enters through the distributor at the top of the tower and descends along the surface of the packing. The gas flows upstream from the lower part of the tower through the pores of the packing, and interacts closely with the liquid. The structure is relatively simple and maintenance is convenient. Widely used in gas absorption, distillation, extraction and other operations. Gas is sent from the bottom of the tower, distributed through a gas distribution device (small diameter towers generally do not have gas distribution devices), and then continuously flows against the liquid through the gaps in the packing layer. On the surface of the packing, the gas-liquid two phases are in close contact for mass transfer. A packed tower belongs to a continuous contact gas-liquid mass transfer equipment, and the composition of the two phases changes continuously along the tower height. Under normal operating conditions, the gas phase is a continuous phase and the liquid phase is a dispersed phase. The main purpose is to support the packing inside the tower, while also allowing the smooth passage of gas-liquid two-phase flow. If not designed properly, the liquid flooding of the packed tower may first occur on the packing support device. The structure of the stepped ring packing is similar to that of the Ball ring packing, with rectangular small holes on the ring wall and two layers of cross shaped blades staggered at 45 ° inside the ring. The height of the ring is half of the diameter, and one end of the ring is a flared edge. This structure improves the performance of the stepped ring packing on the basis of the Bauer ring, increasing its production capacity by about 10% and reducing pressure drop by 25%. Moreover, due to the multi-point contact between the packing, the bed layer is uniform, effectively avoiding the phenomenon of channel flow. Stepped rings are generally made of plastic and metal, and have been widely used due to their superior performance compared to fillers with holes on other sidewalls.
    Read More

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact